1.6546
Descriptions 1.6546 datasheet, 1.6546 Chemical, 1.6546 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Militar
| Product parameters | |
| Material Category:: | Structure Steel |
| Steel Grade: | 1.6546 |
| Material Technical Standards:: | DIN |
| Specification Code:: | DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312 |
| Place of Origin: | Germany |
Description
MATERIAL TECHNICAL DATASHEET - DIN 1.6546
Official Test Certificate: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.37 ~ 0.43
Si (％): 0.15 ~ 0.40
Mn (％): 0.70 ~ 1.00
P (％)≤: 0.035
S (％)≤: 0.030
Cr (%): 0.40 ~ 0.60
Ni (%): 0.40 ~ 0.70
Mo (%): 0.15 ~ 0.30
Other (％): Cu ≤ 0.25
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 885
Yield strength σs≥/MPa: 725
Elongation δ5≥(%): 25.0
AKV≥/J: -
Annealed hardness HB: 252
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT AVAILABLE PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W50 ~ 1000mm X L1000 ~ 4000mm
Sheet steel via cold rolled: T1.5 - 3mm X W100 ~ 1000mm X L1000 ~ 2000mm
Steel strip via cold rolled: T0.4 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
Official Test Certificate: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.37 ~ 0.43
Si (％): 0.15 ~ 0.40
Mn (％): 0.70 ~ 1.00
P (％)≤: 0.035
S (％)≤: 0.030
Cr (%): 0.40 ~ 0.60
Ni (%): 0.40 ~ 0.70
Mo (%): 0.15 ~ 0.30
Other (％): Cu ≤ 0.25
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength σb≥/MPa: 885
Yield strength σs≥/MPa: 725
Elongation δ5≥(%): 25.0
AKV≥/J: -
Annealed hardness HB: 252
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT AVAILABLE PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W50 ~ 1000mm X L1000 ~ 4000mm
Sheet steel via cold rolled: T1.5 - 3mm X W100 ~ 1000mm X L1000 ~ 2000mm
Steel strip via cold rolled: T0.4 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
