Datasheet 1.8152 Flat bars 54SiCrV6 Round bars
Description 1.8152 datasheet, 1.8152 Chemical, EN 1.8152 Properties Steelmaking, ESR & VAR technique, Blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials con
| Product parameters | |
| Specification Code:: | DIN EN 10089 |
| Melting Process Route:: | EAF + VD + LF / BEF + ESR |
| Min. order quantity Per Batch:: | 1300 KG |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Standard Export Packing Way:: | Wooden box, pallet / tray free from fumigation |
Description
Alloy structural steel is provided with higher yield strength, tensile strength, endurance strength, yield ratio (about 0.85 generally ) enough plasticity and toughness. The concentration of alloy element of this kind of steel is quite high, mainly are corrosion resistant steel, heat resistant steel, wear resistant steel, and other special steels of physical and chemical properties. Alloy structural steel has preferable mechanical property than that of carbon structural steel, high performance of heat treatment especially.
Alloy structural steel are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. Bars are usually supplied black/bright in the annealed condition.
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.51 ~ 0.59, Si (％): 1.30 ~ 1.70, Mn (％): 0.60 ~ 0.90, P (％)≤: 0.025, S (％)≤: 0.025
Cr (%): 0.50 ~ 0.80, Mo (%): -, V (％): 0.07 ~ 0.25
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Delivery hardness: HBW 248 max.
Tensile strength, ≥|σb/MPa: -
Yield strength, ≥|σs/MPa: -
Elongation, ≥| δ5(%): -
Reduction of area, ≥ |ψ(%): -
Impact strength, ≥|AKV - DVM-V /J: -
AVAILABLE PRODUCT PROFILE
Round bar / Wire rod (Diameter1): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1200mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
