Description
C (%) | 0.17 ~ 0.22 |
Si(%) | 0.30~ 0.60 |
Mn(%) | 1.00 ~ 1.30 |
P(%) | ≤ 0.045 |
S (%) | ≤ 0.045 |
Cr (%) | ≤ 0.30 |
Ni (%) | - |
Mo(%) | - |
Other (%) | - |
Condition of heat treatment | - |
Tensile Rm (MPa) | 510 ~ 610 |
Yield Rp0.2 (MPa) | 315 |
Elongation A (%) | 20 |
Reduction in cross section on fracture Z (%) | - |
Impact AKV/AKU (J) | 34 |
Brinell Hardness (HBW) | 152 ~ 180 |
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
Forms and Shapes: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |