Description
C (%) | 0.36 ~ 0.44 |
Si(%) | 0.15 ~ 0.40 |
Mn(%) | 0.30 ~ 0.85 |
P(%) | ≤ 0.030 |
S (%) | ≤ 0.035 |
Cr (%) | 0.90 ~ 1.20 |
Ni (%) | - |
Mo(%) | 0.60 ~ 0.75 |
Other (%) | V 0.25 ~ 0.35 Al ≤ 0.015 |
Condition of heat treatment | - |
Tensile Rm (MPa) | 850 ~ 1000 |
Yield Rp0.2 (MPa) | 700 |
Elongation A (%) | 14 |
Reduction in cross section on fracture Z (%) | - |
Impact AKV/AKU (J) | 41 |
Brinell Hardness (HBW) | - |
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
Forms and Shapes: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |