AISI 3140
Inventory AISI 3140 Specifications, Suppliers AISI 3140 Datasheet, Chemical AISI 3140 Stocklist from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machin
| Product parameters | |
| Material Category:: | Structural Steel |
| Steel Grade: | AISI 3140 |
| Material Technical Standards:: | SAE |
| Specification Code:: | AISI 3140 |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - Grade AISI 3140
MATERIAL CATEGORY - SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS - SAE J1249 -2000
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.43
Si (%): 0.20 ~ 0.35
Mn (％): 0.70 ~ 0.90
P (％)≤: 0.040
S (％)≤: 0.040
Cr (%): 0.55 ~ 0.75
Ni (%): 1.10 ~ 1.40
Mo (%): -
MECHANICAL PROPERTIES AND HOT WORKING
Mechanical property ≥ σb/MPa: 980
Mechanical property ≥ σs/MPa: 785
Mechanical property ≥ δ5 (%): 10
Mechanical property ≥ ψ (％): 45
Hot working temperature /℃: 1100～850
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
PROFILE AND DIMENSIONS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T40 - 400mm X W50 - 1200mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@cnlhss.com
MATERIAL CATEGORY - SAE, AISI, UNS system alloy structural steel
MATERIAL SPECIFICATIONS - SAE J1249 -2000
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.38 ~ 0.43
Si (%): 0.20 ~ 0.35
Mn (％): 0.70 ~ 0.90
P (％)≤: 0.040
S (％)≤: 0.040
Cr (%): 0.55 ~ 0.75
Ni (%): 1.10 ~ 1.40
Mo (%): -
MECHANICAL PROPERTIES AND HOT WORKING
Mechanical property ≥ σb/MPa: 980
Mechanical property ≥ σs/MPa: 785
Mechanical property ≥ δ5 (%): 10
Mechanical property ≥ ψ (％): 45
Hot working temperature /℃: 1100～850
MAIN FEATURES AND MELTING PROCESS
The steels shall be manufactured by melting process EF, LF + EAF+ VD, IFF + ESR Melted. VIM + ESR can be handled by agreement.
Forgings may be furnished in one of the following conditions: stress relieving; annealing; solution treatment; solution treatment and ageing; normalizing; normalizing and tempering; or quenching and tempering.
PROFILE AND DIMENSIONS
Round bar (Diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 800mm
Length: random length, fixed length or based on the customer's special requirement.
Steel strip: T0.20 ~ 3mm X W10 ~ 2000mm X Coil
Heavy/middle plate via hot rolled: T40 - 400mm X W50 - 1200mm X L1000-12000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@cnlhss.com
