EN 56A
Material standards EN 56A datasheet, Ex-stock EN 56A Chemical, EN 56A Properties Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform
| Product parameters | |
| Material Category:: | Structural Steel |
| Steel Grade: | EN 56A |
| Material Technical Standards:: | BS |
| Specification Code:: | BS970 Part 5 |
| Place of Origin: | England |
Description
TECHNICAL DATA SHEET - Grade EN 56A
MATERIAL CATEGORY - alloy steel with high tensile
TECHNICAL SPECIFICATION - BS970 Part 5
MELTING: Consumable electrode remelted steel
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.08 ~ 0.15
Mn (％): ≤ 1.50
Si (％): ≤ 1.50
P (％)≤: 0.035
S (％)≤: 0.025
Cr (%): 12.0 ~ 14.0
Ni (%): 0.80 ~ 1.30
MECHANICAL PROPERTY AND HARDNESS
Quenching temperature /℃:-
Tempering temperature /℃:-
Tensile strength,σb/≥ MPa: 695
Yield strength, σ0.2/≥ MPa: 275
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥(％): -
Hardness in condition of annealing +A: HB255 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - alloy steel with high tensile
TECHNICAL SPECIFICATION - BS970 Part 5
MELTING: Consumable electrode remelted steel
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.08 ~ 0.15
Mn (％): ≤ 1.50
Si (％): ≤ 1.50
P (％)≤: 0.035
S (％)≤: 0.025
Cr (%): 12.0 ~ 14.0
Ni (%): 0.80 ~ 1.30
MECHANICAL PROPERTY AND HARDNESS
Quenching temperature /℃:-
Tempering temperature /℃:-
Tensile strength,σb/≥ MPa: 695
Yield strength, σ0.2/≥ MPa: 275
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥(％): -
Hardness in condition of annealing +A: HB255 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
