3Cr12
Specifications 3Cr12 Datasheet, Inventory 3Cr12 Chemical, Stocklist 3Cr12 Plate Properties from Steelmaking (EF / VIM ), ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold work
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | 3Cr12 |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A240, A312, A632 |
| Place of Origin: | USA |
Description
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - Grade 3Cr12
SPECIAL MELTING PROCESS - EAF + AOD / + ESR
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferritic stainless steel series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - ASTM A240, A312, A632
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 10.5 ~ 12.5
Ni (％): 0.30 ~ 1.00
Mo (％): -
N (&): ≤ 0.030
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of thermal treatment: +A ( annealed)
Hardness under annealed ≤HBS: 185
Tensile strength σb/MPa: 450
Yield strength σ0.2≥/MPa: 280
Elongation δ ≥(％): 18.0
Elongation δ (transversal )≥(％): -
Impact absorbing power Akv≥/J : -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@cnlhss.com
TECHNICAL SPECIFICATION DATASHEET - Grade 3Cr12
SPECIAL MELTING PROCESS - EAF + AOD / + ESR
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferritic stainless steel series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - ASTM A240, A312, A632
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 10.5 ~ 12.5
Ni (％): 0.30 ~ 1.00
Mo (％): -
N (&): ≤ 0.030
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of thermal treatment: +A ( annealed)
Hardness under annealed ≤HBS: 185
Tensile strength σb/MPa: 450
Yield strength σ0.2≥/MPa: 280
Elongation δ ≥(％): 18.0
Elongation δ (transversal )≥(％): -
Impact absorbing power Akv≥/J : -
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@cnlhss.com
