403Mod
Specifications 403Mod Datasheet, Ex-stock suppliers 403Mod Chemical, Inventory AISI 403Mod Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | 403Mod |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A1021 (2015) |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - AISI 403Mod
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
CUSTOMS HS CODE - 72221100 / 72222000
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.10 ~ 0.15
Si (％): ≤ 0.50
Mn (％): 0.25 ~ 0.80
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 11.5 ~ 13.0
Ni (％): ≤ 0.75
Mo (％): ≤ 0.50
Cu (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T )
Tensile strength, σb/MPa: 760
Yield strength, σ0.2/MPa: 620
Elongation, δ(％): 18.0
Reduction of area, ф ≥ (％): 60.0
Impact strength, Akv ≥/J: 80 Min.
Hardness via heat treatment /HBW: 201 ~ 248
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 500mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1200 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
CUSTOMS HS CODE - 72221100 / 72222000
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.10 ~ 0.15
Si (％): ≤ 0.50
Mn (％): 0.25 ~ 0.80
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 11.5 ~ 13.0
Ni (％): ≤ 0.75
Mo (％): ≤ 0.50
Cu (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T )
Tensile strength, σb/MPa: 760
Yield strength, σ0.2/MPa: 620
Elongation, δ(％): 18.0
Reduction of area, ф ≥ (％): 60.0
Impact strength, Akv ≥/J: 80 Min.
Hardness via heat treatment /HBW: 201 ~ 248
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 500mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1200 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
