7C27Mo2
Specifications 7C27Mo2 datasheet, 7C27Mo2 Chemical, 7C27Mo2 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these material
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | 7C27Mo2 |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A276, ASTM F899 |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - Grade 7C27Mo2
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Martensitic stainless steel
MATERIAL STANDARDS - ASTM A276, ASTM F899
APPLICATION FIELD - cutters & food processing equipment
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.35 ~ 0.42
Si (％): 0.15 ~ 0.50
Mn (％): 0.30 ~ 0.90
P (％)≤: 0.025
S (％)≤: 0.010
Cr (％): 13.0 ~ 13.8
Ni (％): -
Mo (％): 1.00 ~ 1.50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T6 - 400mm X W60 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email sales@cnlhss.com
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Martensitic stainless steel
MATERIAL STANDARDS - ASTM A276, ASTM F899
APPLICATION FIELD - cutters & food processing equipment
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.35 ~ 0.42
Si (％): 0.15 ~ 0.50
Mn (％): 0.30 ~ 0.90
P (％)≤: 0.025
S (％)≤: 0.010
Cr (％): 13.0 ~ 13.8
Ni (％): -
Mo (％): 1.00 ~ 1.50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T6 - 400mm X W60 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email sales@cnlhss.com
