AMS 5583
Inventory AMS 5583 Specifications, Suppliers AMS 5583 Datasheet, Chemical Property AMS 5583 Stockholder from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working o
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5583 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5583E |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARD - Grade AMS 5583
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5583E
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report- issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): 14.0 ~ 17.0
Ni (％): 70.0 min.
Nb (%): 0.70 ~ 1.20
Ti (％): 2.25 ~ 2.75
Al (％): 0.40 ~ 1.00
Cu (％): ≤ 0.50
Co (%): ≤ 1.00
Fe (%): 5.00 ~ 9.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 965
Yield strength, σ0.2/MPa: 552
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 620mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5583E
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report- issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％)≤: 0.010
S (％)≤: 0.010
Cr (％): 14.0 ~ 17.0
Ni (％): 70.0 min.
Nb (%): 0.70 ~ 1.20
Ti (％): 2.25 ~ 2.75
Al (％): 0.40 ~ 1.00
Cu (％): ≤ 0.50
Co (%): ≤ 1.00
Fe (%): 5.00 ~ 9.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 965
Yield strength, σ0.2/MPa: 552
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 620mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
