AMS 5595
Stocklist AMS 5595 Specifications, Suppliers AMS 5595 Inventory, Datasheet AMS 5595 Chemical from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined.
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5595 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5595G |
| Place of Origin: | USA |
Description
MATERIAL SPECIFICATION DATASHEET - Grade AMS 5595
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5595G
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.30mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions ( Mass Weight % )
C (％): ≤ 0.04
Mn (％): 8.00 ~ 10.0
Si (％): ≤ 1.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 19.0 ~ 21.5
Ni (%): 5.50 ~ 7.50
N (%): 0.15 ~ 0.40
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, strip and forgings
Heat treatment condition: -
Tensile strength, σb/MPa: 620
Yield strength, σ0.2/MPa: 345
Elongation, δ(％): 40.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 550mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5595G
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.30mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions ( Mass Weight % )
C (％): ≤ 0.04
Mn (％): 8.00 ~ 10.0
Si (％): ≤ 1.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 19.0 ~ 21.5
Ni (%): 5.50 ~ 7.50
N (%): 0.15 ~ 0.40
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, strip and forgings
Heat treatment condition: -
Tensile strength, σb/MPa: 620
Yield strength, σ0.2/MPa: 345
Elongation, δ(％): 40.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 550mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
