AMS 5714
Aerospace material AMS 5714 datasheet, AMS 5714 Chemical, AMS 5714 Properties Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materi
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5714 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5714C |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARD - AMS 5714
MATERIAL CATEGORY - high alloy stainless Steel Series
TECHNICAL SPECIFICATION - AMS 5714C
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Mn (％): ≤ 1.00
Si (％): ≤ 0.70
P (％)≤: 0.015
S (％)≤: 0.010
Cr (％): 14.0 ~ 17.0
Ni (％): 70.0 Min
Ti (%): 2.20 ~ 2.75
Al (%): 0.50 ~ 1.00
Fe (%): 5.00 ~ 9.00
Co (%): ≤ 1.00
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: bars, forgings, rings
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 655
Elongation, δ(％): 14.0
Reduction of area, ф(％): 20.0
Hardness (HB): 277
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), BEF (AOD) & VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - high alloy stainless Steel Series
TECHNICAL SPECIFICATION - AMS 5714C
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Mn (％): ≤ 1.00
Si (％): ≤ 0.70
P (％)≤: 0.015
S (％)≤: 0.010
Cr (％): 14.0 ~ 17.0
Ni (％): 70.0 Min
Ti (%): 2.20 ~ 2.75
Al (%): 0.50 ~ 1.00
Fe (%): 5.00 ~ 9.00
Co (%): ≤ 1.00
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: bars, forgings, rings
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 655
Elongation, δ(％): 14.0
Reduction of area, ф(％): 20.0
Hardness (HB): 277
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), BEF (AOD) & VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 600mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 600mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
