Shaft Part Machining Aquamet 18 Round Bar
Aquamet 18 - Shaft material processing, equivalent to grade S24100 Austenitic stainless steel that is fully austenitic, non-magnetic and strengthened by nitrogen 0.30% addition.
| Product parameters | |
| Material Category:: | Austenitic Stainless Steel |
| Terms of Price:: | Ex works, CIF, CFR |
| Stocklist & Inventory Available:: | Shaft diam. 50 ~ 165mm |
| Melting Process Route:: | EAF + VD + LF / BEF + ESR |
| Certification:: | MTR, COC, Certificate of origin, Form A/E, Invoice, Packing list |
| Heat Treatment Practice:: | Solution annealed 1050 ℃, water or air cooled |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Standard Export Packing Way:: | Wooden box / pallet, or per buyer |
| Production Lead Time:: | Within 45 days after payment |
Description
AQUAMET 18 is currently in wide use in pleasure boats, workboats, crew boats, fishing trawlers, pilot and patrol boats.
Grade Aquamet 18 is usually taken a special steelmaking technique by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Chemical elements (Mass weight - %)
C (％): ≤ 0.15, Si (％): ≤ 1.00, Mn (％): 11.0 ~ 14.0, P (％)≤: 0.040, S (％)≤: 0.030
Cr (％): 16.5 ~ 19.0, Ni (％): 0.50 ~ 2.50, Mo (％): -, Ti (%): -, N (％): 0.20 ~ 0.45
Mechanical properties under room temperature
Tensile strength, σb/≥ MPa: 827
Yield strength, σ0.2/≥ MPa: 620
Elonghation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 45.0
Hardness | HB: -
Major applications and features for this type of grade
Engine components.
High strength and boat propeller shafts.
Plastic moulding dies
Corrosion resistant & Heat resistant quality & Polishing performance
Metals, Stocklist and Services
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
With extensive Stock with a prompt delivery, Customizing special material is welcome.
Heat Treatment Practice
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Steel inquiry
For a best price and material enquiry, please feel free to contact us for more details.
