ASTM A1021 Grade A
Specifications ASTM A1021 Grade A Datasheet, Ex-stock A1021 Grade A Suppliers Chemical, Inventory ASTM A1021 Grade A Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | ASTM A1021 Grade A |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A1021 (2015) |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - ASTM A1021 Grade A
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.018
S (％)≤: 0.015
Cr (％): 11.5 ~ 13.5
Ni (％): ≤ 0.75
Mo (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T)
Tensile strength, σb/MPa: 690
Yield strength, σ0.2/MPa: 485
Elongation, δ(％): 20.0
Reduction of area, ф ≥ (％): 60.0
Impact strength, Akv ≥/J: 41 Min.
Hardness via heat treatment /HBW: 255 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1500 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.018
S (％)≤: 0.015
Cr (％): 11.5 ~ 13.5
Ni (％): ≤ 0.75
Mo (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T)
Tensile strength, σb/MPa: 690
Yield strength, σ0.2/MPa: 485
Elongation, δ(％): 20.0
Reduction of area, ф ≥ (％): 60.0
Impact strength, Akv ≥/J: 41 Min.
Hardness via heat treatment /HBW: 255 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1500 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
