FV520B Precipitation Hardening Stainless Steel Bar
| Product parameters | |
| Material category:: | Martensitic precipitation hardening steel |
| Stock & Inventory available:: | Diameter 50 ~ 200 mm |
| Melting process way:: | EF + VD + ESR refining |
Description
TECHNICAL DATA SHEET
FV520B is a well-known precipitation hardening martensitic stainless steel, originally developed for aerospace applications. It balances outstanding tensile strength, fracture toughness and moderate corrosion resistance.
This grade can reach high strength after low-temperature precipitation hardening treatment, with less distortion compared with traditional hardening steel. Widely used for compressor blades, turbine discs, pump shafts, high-pressure valve parts and offshore mechanical components.
RELATED MATERIAL SPECIFICATIONS
ATM1230048
DIN EN 10088-1
DIN EN 10088-3
BS S144, S143, S145
DIN 1.4594, X4CrNiMoCuNb14-5
TYPICAL CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C : ≤ 0.07
Silicon, Si : ≤ 0.50
Manganese, Mn : 0.30 ~ 0.80
Phosphorus, P : ≤ 0.025
Sulfur, S : ≤ 0.015
Chromium, Cr : 13.0 ~ 15.0
Nickel, Ni : 5.00 ~ 6.00
Molybdenum, Mo : 1.20 ~ 2.00
Copper, Cu : 1.40 ~ 2.10
Niobium, Nb : 0.15 ~ 0.30
HEAT TREATMENT PRACTICE, MECHANICAL PROPERTIES
Supply condition
Double over-aged, 1050 ℃ + 2 hours 750 / 850 ℃ ,+ 2 hours 620 ℃
Proof stress (N/mm2): 800
Tensile strength, Rm / MPa: 925 ~ 1035
Yield strength, Rp0.2 / MPa: 785 Min.
Elongation, A5: 15.0% Min.
Hardness, HB: 277 ~ 341
Impact strength, Akv / Min.: 40J
DENSITY: 7.80kg/dm
STOCK IN HAND: round bar 50 ~ 200 mm, ESR ingot
KEY ADVANTAGES
- High tensile strength, good fracture toughness after aging
- Low distortion during precipitation hardening heat treatment
- Good corrosion resistance in fresh water, weak acid and atmospheric environment
- Good machinability under suitable heat treatment state
- Stable performance at medium working temperature
- Can be supplied in solution treated or aged condition
- Round bar, rod, disc: Φ10 ~ Φ950 mm
- Flat Bar, rectangular bar: thickness 10 ~ 200 mm
- Steel sheet, plate: thickness 1.0 ~ 300 mm
- Forging, forged block: custom drawing according to your requirement
- Cut-to-length service, saw cutting, rough machining available.
TYPICAL APPLICATIONS
- Aerospace: Compressor blades, aircraft structural components
- Power energy: Gas turbine parts, turbo machinery
- Chemical equipment parts
- Mechanical parts used in the condition of corrosion resistance
- Bolts and nuts for industry purpose
- Industrial fan blades and blowers
- Steam and gas turbine components
- Compressors, rotors, shafts, and gears
- High-stress structural aerospace and marine parts.
- Oil & Gas: high-pressure valves, pump shafts, downhole accessories
- General high-strength mechanical parts requiring toughness and corrosion resistance.
OUR SUPERIER SERVICE
- EN 10204 MTC 3.1 available
- Third-party inspection support (SGS, TÜV, CNAS as requested)
- Electric circular saw, band saw machine, peeling machine processing services
- Export packing: Wooden case, seaworthy package for sea freight
- Shipment: By Sea, Air, International express
- Technical support: heat treatment suggestion, material selection solution
FREQUENTLY ASKED QUESTIONS
Q1: Can you arrange FV520B sample for lab testing?
A: Samples are available, sample cost and lead time depend on sample dimensions.
Q2: Can you provide heat treatment service for Grade FV520B:
A: We generally supply annealed material, and QT quenched‑tempered materials as per the customer requirement.
Q3: Can you supply FV520B forgings?
A: Yes, we produce custom FV520B forgings based on your drawings.
Q4: What heat treatment condition can you supply?
A: Solution annealed or aged hardened state (H950, H1050, H1150).
FV520B is a well-known precipitation hardening martensitic stainless steel, originally developed for aerospace applications. It balances outstanding tensile strength, fracture toughness and moderate corrosion resistance.
This grade can reach high strength after low-temperature precipitation hardening treatment, with less distortion compared with traditional hardening steel. Widely used for compressor blades, turbine discs, pump shafts, high-pressure valve parts and offshore mechanical components.
RELATED MATERIAL SPECIFICATIONS
ATM1230048
DIN EN 10088-1
DIN EN 10088-3
BS S144, S143, S145
DIN 1.4594, X4CrNiMoCuNb14-5
TYPICAL CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C : ≤ 0.07
Silicon, Si : ≤ 0.50
Manganese, Mn : 0.30 ~ 0.80
Phosphorus, P : ≤ 0.025
Sulfur, S : ≤ 0.015
Chromium, Cr : 13.0 ~ 15.0
Nickel, Ni : 5.00 ~ 6.00
Molybdenum, Mo : 1.20 ~ 2.00
Copper, Cu : 1.40 ~ 2.10
Niobium, Nb : 0.15 ~ 0.30
HEAT TREATMENT PRACTICE, MECHANICAL PROPERTIES
Supply condition
Double over-aged, 1050 ℃ + 2 hours 750 / 850 ℃ ,+ 2 hours 620 ℃
Proof stress (N/mm2): 800
Tensile strength, Rm / MPa: 925 ~ 1035
Yield strength, Rp0.2 / MPa: 785 Min.
Elongation, A5: 15.0% Min.
Hardness, HB: 277 ~ 341
Impact strength, Akv / Min.: 40J
DENSITY: 7.80kg/dm
STOCK IN HAND: round bar 50 ~ 200 mm, ESR ingot
KEY ADVANTAGES
- High tensile strength, good fracture toughness after aging
- Low distortion during precipitation hardening heat treatment
- Good corrosion resistance in fresh water, weak acid and atmospheric environment
- Good machinability under suitable heat treatment state
- Stable performance at medium working temperature
- Can be supplied in solution treated or aged condition
- Round bar, rod, disc: Φ10 ~ Φ950 mm
- Flat Bar, rectangular bar: thickness 10 ~ 200 mm
- Steel sheet, plate: thickness 1.0 ~ 300 mm
- Forging, forged block: custom drawing according to your requirement
- Cut-to-length service, saw cutting, rough machining available.
TYPICAL APPLICATIONS
- Aerospace: Compressor blades, aircraft structural components
- Power energy: Gas turbine parts, turbo machinery
- Chemical equipment parts
- Mechanical parts used in the condition of corrosion resistance
- Bolts and nuts for industry purpose
- Industrial fan blades and blowers
- Steam and gas turbine components
- Compressors, rotors, shafts, and gears
- High-stress structural aerospace and marine parts.
- Oil & Gas: high-pressure valves, pump shafts, downhole accessories
- General high-strength mechanical parts requiring toughness and corrosion resistance.
OUR SUPERIER SERVICE
- EN 10204 MTC 3.1 available
- Third-party inspection support (SGS, TÜV, CNAS as requested)
- Electric circular saw, band saw machine, peeling machine processing services
- Export packing: Wooden case, seaworthy package for sea freight
- Shipment: By Sea, Air, International express
- Technical support: heat treatment suggestion, material selection solution
FREQUENTLY ASKED QUESTIONS
Q1: Can you arrange FV520B sample for lab testing?
A: Samples are available, sample cost and lead time depend on sample dimensions.
Q2: Can you provide heat treatment service for Grade FV520B:
A: We generally supply annealed material, and QT quenched‑tempered materials as per the customer requirement.
Q3: Can you supply FV520B forgings?
A: Yes, we produce custom FV520B forgings based on your drawings.
Q4: What heat treatment condition can you supply?
A: Solution annealed or aged hardened state (H950, H1050, H1150).
Submit an enquiry for the displaying steel materials you are interested in TODAY!
Review











