EN18
Descriptions EN18 datasheet, EN18 Chemical, EN 18 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standar
| Product parameters | |
| Material Category:: | Structure Steel |
| Steel Grade: | EN18 |
| Material Technical Standards:: | BS |
| Specification Code:: | BS970 |
| Place of Origin: | England |
Description
TECHNICAL DATA SHEET - Grade EN18
MATERIAL CATEGORY - High tensile steel
TECHNICAL SPECIFICATION - BS970
OFFICIAL TEST REPORT: issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.35 ~ 0.45
Mn (％): 0.60 ~ 0.95
Si (％): 0.10 ~ 0.35
P (％)≤: 0.040
S (％)≤: 0.040
Cr (%): 0.85 ~ 1.15
Ni (%): -
Mo (%): -
MECHANICAL PROPERTY AND HARDNESS
Quenching temperature /℃: 830 ~ 860, oil
Tempering temperature /℃: 510 ~ 530, water or oil
Tensile strength,σb/≥ MPa: 980
Yield strength, σ0.2/≥ MPa: 785
Elongation, δ ≥(％): 9.0
Reduction of area, ф ≥(％): 45.0
Hardness in annealed condition: HB 207 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, LF + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 6mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com.
MATERIAL CATEGORY - High tensile steel
TECHNICAL SPECIFICATION - BS970
OFFICIAL TEST REPORT: issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.35 ~ 0.45
Mn (％): 0.60 ~ 0.95
Si (％): 0.10 ~ 0.35
P (％)≤: 0.040
S (％)≤: 0.040
Cr (%): 0.85 ~ 1.15
Ni (%): -
Mo (%): -
MECHANICAL PROPERTY AND HARDNESS
Quenching temperature /℃: 830 ~ 860, oil
Tempering temperature /℃: 510 ~ 530, water or oil
Tensile strength,σb/≥ MPa: 980
Yield strength, σ0.2/≥ MPa: 785
Elongation, δ ≥(％): 9.0
Reduction of area, ф ≥(％): 45.0
Hardness in annealed condition: HB 207 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, LF + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 6mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com.
