17-4PH Bars S17400 Forgings 1.4542 Plate Ex-stock
Grade 17-4PH & S17400 is a precipitation hardening martensitic stainless steel. Alloy 17-4PH combines high strength, hardness (up to HRC40), and corrosion resistance. Mechanical properties at RM can be optimized with final age treatment.
Product parameters | |
Material Category:: | Martensitic Stainless Steel |
Material Technical Standards:: | ASTM A705, AMS 5643, ASTM A693 |
Terms of Price:: | Ex works, CIF, CFR |
Stocklist & Inventory Available:: | Diameter 10 ~ 400mm |
Melting Process Route:: | EAF + VD + LF / BEF + ESR / VAR |
Heat Treatment Practice:: | Hardened 1050 ℃, water or oil cooled, tempered 480 ~ 620 ℃, air cooled |
Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
Standard Export Packing Way:: | Wooden box, pallet / tray free from fumigation |
Production Lead Time:: | Within 15 days after 30% deposit prepayable |
Description
Grade 17-4PH & S17400 is A Precipitation Hardening Martensitic Stainless steel with an addition of Nb/Cu elements. Grade 17-4PH Combines High Strength, hardness (up to HRC40), and corrosion resistance. Mechanical properties at RM can be optimized with final age treatment.
Grade 17-4PH / SS630 is usually taken a special steelmaking technique by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Major applications and features for this type of grade
Engine components.
High strength and boat propeller shafts.
Plastic moulding dies
Corrosion resistant & Heat resistant quality & Polishing performance
Metals, Stocklist and services
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
With extensive Stock with a prompt delivery, Customizing special material is welcome.
Heat treatment practice
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Typical applications
Chemical equipment & parts.
Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe, Electronics, Turbine motor blade.
Bolt and nut, Valve body, Pressure vessel.
Chemical compositions ( Mass weight % ) - Grade 17-4PH
C (%): ≤ 0.070, Si (%): ≤ 1.00, Mn (%): ≤ 0.50, P (%)≤: 0.030, S (%)≤: 0.015
Cr (%): 15.0 ~ 16.0, Ni (%): 3.00 ~ 4.50, Mo (%): ≤ 0.60, Nb (%): 0.15 ~ 0.35
Cu (%): 3.00 ~ 3.70, Fe (%): balance
Mechanical properties under the different heat treatment
Condition of thermal treatment: AT (Solution treatment)
Hardness ≤HBS: 360
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: ≤ 1200
Elongation δ ≥(%): -
Elongation δ(transversal )≥(%): -
Impact absorbing power Akv≥/J : -
Condition of thermal treatment: P930
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 720
Tensile strength σb/MPa: 930~1100
Elongation δ ≥(%): -16
Impact absorbing power Akv≥/J : 40
Condition of thermal treatment: P960
Hardness ≤HBS: -
Yield strength σ0.2≥/MPa: 790
Tensile strength σb/MPa: 960~1160
Elongation δ ≥(%): 12
Impact absorbing power Akv≥/J : -