K94600
Specifications K94600 Datasheet, K94600 Chemical, K94600 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials c
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | K94600 |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM F30 -1996 |
| Place of Origin: | USA |
Description
MATERIAL DATASHEET - UNS K94600
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Nickel iron alloy
TECHNICAL STANDARDS - ASTM F30 -1996
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％): ≤ 0.30
Mn (％): ≤ 0.80
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): ≤ 0.25
Ni (％): 45.0 ~ 47.0
Al (％): ≤ 0.10
MECHANICAL PROPERTIES AT RM
Solution treatment temperature: -
Tensile strength, σb≥ /MPa: -
Yeild strength, σ0.2 ≥/MPa: -
Elongation, δ≥(％): -
Impact, Akv ≥/J: -
Hardness (HRB): 82 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the bright annealed condition.
Final heat treatment - as per requirement
PRODUCT FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Wire rod (Diameter): 5.5mm to 16mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.4 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Nickel iron alloy
TECHNICAL STANDARDS - ASTM F30 -1996
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％): ≤ 0.30
Mn (％): ≤ 0.80
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): ≤ 0.25
Ni (％): 45.0 ~ 47.0
Al (％): ≤ 0.10
MECHANICAL PROPERTIES AT RM
Solution treatment temperature: -
Tensile strength, σb≥ /MPa: -
Yeild strength, σ0.2 ≥/MPa: -
Elongation, δ≥(％): -
Impact, Akv ≥/J: -
Hardness (HRB): 82 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the bright annealed condition.
Final heat treatment - as per requirement
PRODUCT FORMS & DIMENSIONS
Round bar (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Wire rod (Diameter): 5.5mm to 16mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.4 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
