Jethete M-152 ESR Ingot Available Stock
The alloy Jethete M152 is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
| Product parameters | |
| Material Category:: | Martensitic Stainless Steel Series |
| Material Technical Standards:: | ASTM A565 -2014 |
| Stocklist & Inventory Available:: | Diameter 55 ~ 250mm |
| Melting Process Route:: | EAF + VD + LF / BEF + ESR |
| Min. order quantity Per Batch:: | 200 KG |
| Product Shapes:: | Round bar, Flat bar, Plate |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Production Lead Time:: | Within 5 days after 30% deposit prepayable |
| ISO 9001-2015 Certified by:: | UKNAS |
| Company ISO Register No:: | UQ211218R0 |
Description
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.08 ~ 0.13, Si (％): ≤ 0.35, Mn (％): 0.50 ~ 0.90, P (％)≤: 0.025, S (％)≤: 0.015
Cr (％): 11.0 ~ 12.5, Ni (％): 2.00 ~ 3.00, Mo (％): 1.50 ~ 2.00, Nb/Ti (%): -, V (％): 0.25 ~ 0.40
N (%): 0.02 ~ 0.04, Fe (%): balance.
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Heat treatment
Tensile strength, σb≥/MPa: 930~1130
Yield strength, σ0.2≥/MPa: 760
Elongation, δ5 (%)≥: 14.0
Hardness ≤HBW: 288 ~ 331
FORMS & DIMENSIONS AVAILABLE
Round bar / Wire rod (Diameter1): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
