X22CrMoV12-1 | EN 1.4923 Hot Forging Ring
This page provides X22CrMoV12-1 Datasheet Stock, EN 1.4923 Round bar, Mechanical properties, Chemical element, Performance specifications.
| Product parameters | |
| Melting Process Route:: | BEF + AOD / +ESR |
| Product Shapes:: | Round bar, Flat bar, Steel Strip, and Forge piece |
| Production Lead Time:: | Within 65 days after 40% deposit prepayable |
| ISO 9001-2015 Certified by:: | UKAS |
| Unified Social Credit Code:: | 91510871777942750J |
| Company ISO Register No:: | UQ211218R0 |
Description
Introduction:
X22CrMoV12-1 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
X22CrMoV12-1 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Applications:
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X22CrMoV12-1 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X22CrMoV12-1 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
Grade Equivalent
| DIN | W-Nr | Other |
|---|---|---|
| X22CrMoV12-1 | W-Nr 1.4923 | 1.4934 |
Chemical Composition (Mass Weight %)
| C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|
| 0.18 ～ 0.24 | 0.18 ～ 0.24 | 0.40 ～ 0.90 | ≤ 0.025 | ≤ 0.015 | 11.0 ～ 12.5 | 0.30 ～ 0.80 | 0.80 ～ 1.20 | V 0.25 ～ 0.35 |
Typical Mechanical Properties
| Condition of heat treatment | Tensile Rm(MPa) |
Yield Rp0.2(MPa) |
Elongation A(%) |
Reduction in cross section on fracture Z (%) |
Impact AKV/AKU(J) |
Brinell Hardness(HBW) |
|---|---|---|---|---|---|---|
| Annealing | - | - | - | - | - | - |
| Q/T | 800 ～ 950 | ≥ 600 | ≥ 14.0 | - | ≥ 34 | - |
Shapes And Dimension:
Round bar (Diameter): 5.5 to 600 mm
Wire rod (Diameter): 1.0 ~ 12mm
Square bar / Flat bar: 5mm to 550mm
Steel strip via cold rolled: T0.5 - 3mm X W5 - 200mm X L (or in coil form)
Forged ring: OD200 ~ 1500mm X ID150 ~ 1250mm X H20 ~ 1250mm
Heavy/middle plate via hot rolled: T50 - 200mm X W80- 1200mm X L1000-3000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
