XM-32Mod
Specifications 403Mod Datasheet, Ex-stock suppliers 403Mod Chemical, Inventory AISI 403Mod Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | XM-32Mod |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A1021 (2015) |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - Grade XM-32Mod
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 90mm / 200mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.10 ~ 0.17
Si (％): ≤ 0.35
Mn (％): 0.65 ~ 1.05
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 11.25 ~ 12.75
Ni (％): 2.25 ~3.25
Mo (％): 1.50 ~2.00
V (%): 0.25 ~ 0.40
N (%): 0.02 ~ 0.045
W (％): ≤ 0.10
Al (％): ≤ 0.025
Cu (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T)
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 795
Elongation, δ(％): 15.0
Reduction of area, ф ≥ (％): 30.0
Impact strength, Akv ≥/J: 41 Min.
Hardness via heat treatment /HBW: 352 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 520mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1200 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 90mm / 200mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.10 ~ 0.17
Si (％): ≤ 0.35
Mn (％): 0.65 ~ 1.05
P (％)≤: 0.020
S (％)≤: 0.015
Cr (％): 11.25 ~ 12.75
Ni (％): 2.25 ~3.25
Mo (％): 1.50 ~2.00
V (%): 0.25 ~ 0.40
N (%): 0.02 ~ 0.045
W (％): ≤ 0.10
Al (％): ≤ 0.025
Cu (％): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T)
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 795
Elongation, δ(％): 15.0
Reduction of area, ф ≥ (％): 30.0
Impact strength, Akv ≥/J: 41 Min.
Hardness via heat treatment /HBW: 352 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel parts
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 520mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 30 X 12 ~ 1200 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
