1.3559
1.3559 data sheet, 1.3559 Chemical,1.3559 property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining. Technical specification - ISO 683/17. We also
| Product parameters | |
| Material Category:: | Structure Steel |
| Steel Grade: | 1.3559 |
| Material Technical Standards:: | EN |
| Specification Code:: | EN ISO 683-17 |
| Place of Origin: | EU |
Description
Official Test Certificate: issued by TUV - SGS - BV
TECHNICAL SPECIFICATIONS - 1.3559
MATERIAL TYPE: Case hardening bearing steel
MATERIAL STANDARDS: ISO 683/17
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.17 ~ 0.23
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 1.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.60 ~ 1.00
Mo (%): -
Ni (%): -
Other (%): Cu ≤0.30, Al ≤0.050
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC = Spheroidizing annealing
Hardness /≤HBW: 170
Condition: + A = annealing
Hardness /≤HBW: 207
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 500mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer, Email: sales@cnlhss.com.
TECHNICAL SPECIFICATIONS - 1.3559
MATERIAL TYPE: Case hardening bearing steel
MATERIAL STANDARDS: ISO 683/17
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.17 ~ 0.23
Si (％): ≤ 0.40
Mn (％): 0.60 ~ 1.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (%): 0.60 ~ 1.00
Mo (%): -
Ni (%): -
Other (%): Cu ≤0.30, Al ≤0.050
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: + AC = Spheroidizing annealing
Hardness /≤HBW: 170
Condition: + A = annealing
Hardness /≤HBW: 207
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF followed by electroslag refining (ESR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 500mm X W50 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineer, Email: sales@cnlhss.com.
