WS 1.4938 Bar Stock Available
Product parameters | |
Material Category:: | Martensitic Stainless Steel Series |
Stocklist & Inventory Available:: | Diameter 55 ~ 220mm |
Min. order quantity Per Batch:: | one bar |
Product Shapes:: | Round bar, Flat bar, Hollow bar, Plate, and Forgings. |
Customization Service:: | OEM orders are welcomed. |
Production Lead Time:: | Within 5 days after 30% downpayment. |
Description
W-Nr. 1.4938 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Application Field
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.1.4938 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.1.4938 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
All Grades Equivalents
DIN | W-Nr | Other |
---|---|---|
X12CrNiMoV12-3 | W-Nr 1.4938 | 1.4939 |
Chemical Composition (Mass weight %)
C | Si | Mn | P | S | Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
0.08 ~ 0.15 | ≤ 0.50 | 0.40 ~ 0.90 | ≤ 0.025 | ≤ 0.015 | 11.0 ~ 12.5 | 2.00 ~ 3.00 | 1.50 ~ 2.00 | V 0.25 ~ 0.40 V 0.010 ~ 0.040 |
Typical Mechanical Properties
Condition of heat treatment | Tensile Rm(MPa) |
Yield Rp0.2(MPa) |
Elongation A(%) |
Reduction in cross section on fracture Z (%) |
Impact AKV/AKU(J) |
Brinell Hardness(HBW) |
---|---|---|---|---|---|---|
Annealing | - | - | - | - | - | - |
Q/T | 950 ~ 1150 | ≥ 800 | ≥ 13.0 | - | ≥ 55 | - |
Forms and Dimensions Available
Round bar (Diameter): 5.5 ~ 550 mm
Wire rod (Diameter): 0.10 ~ 16mm
Square bar / Flat bar: 5mm ~ 550mm
Forged ring: OD200 ~ 1500mm X ID150 ~ 1250 X H20 ~ 1250mm