2S97
Description 2S97 datasheet, 2S97 Chemical, 2S97 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military stand
| Product parameters | |
| Material Category:: | Structure Steel |
| Steel Grade: | BS 2S97 |
| Material Technical Standards:: | BS |
| Place of Origin: | England |
Description
MATERIAL TECHNICAL DATASHEET - BS 2S97
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Aircraft "S" series alloy structural steel
TYPE OF STEEL: 2.5% Ni-Cr-Mo steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.27 ~ 0.35
Si (％): 0.10 ~ 0.35
Mn (％): 0.45 ~ 0.70
P (％)≤: 0.035
S (％)≤: 0.030
Cr (％): 0.45 ~ 0.70
Ni (%): 2.30 ~ 2.80
Mo (％): 0.45 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 1180~1420
Yield strength σs≥/MPa: 830
Elongation δ5≥(%): 7.0
Impact, AKV≥/J: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE / FORMS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@cnlhss.com) our resident team of qualified production engineers.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Aircraft "S" series alloy structural steel
TYPE OF STEEL: 2.5% Ni-Cr-Mo steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.27 ~ 0.35
Si (％): 0.10 ~ 0.35
Mn (％): 0.45 ~ 0.70
P (％)≤: 0.035
S (％)≤: 0.030
Cr (％): 0.45 ~ 0.70
Ni (%): 2.30 ~ 2.80
Mo (％): 0.45 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 1180~1420
Yield strength σs≥/MPa: 830
Elongation δ5≥(%): 7.0
Impact, AKV≥/J: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE / FORMS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@cnlhss.com) our resident team of qualified production engineers.
