AISI 615 Round bar, AISI 615 Sheet & Strip
| Product parameters | |
| Material category:: | Martensitic Stainless Steel Series |
| Material technical standards:: | ASTM A276, ASTM A693, ASTM A705 |
| Terms of price:: | Ex works, CIF, and CFR |
| Stock & Inventory available:: | Round bar Diam. 25 ~ 120mm |
| Certification:: | Commercial Invoice, Packing list, CO, Bill of lading, Origin of Certificate, Form E |
| Product shapes:: | Round bar, Sheet, Strip, Flat bar |
| Customization service:: | Welcome |
| Company ISO register No.:: | UQ211218R0 |
Description
| C (％) | 0.15 ～ 0.20 |
| Si(％) | ≤ 0.50 |
| Mn(％) | ≤ 0.50 |
| P(％) | ≤ 0.040 |
| S (％) | ≤ 0.030 |
| Cr (％) | 12.0 ～ 14.0 |
| Ni (％) | 1.80 ～ 2.20 |
| Mo(％) | ≤ 0.50 |
| Other (％) | W 2.50 ～ 3.50 |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 965 |
| Yield Rp0.2 (MPa) | 760 |
| Elongation A (%) | 15 |
| Reduction in cross section on fracture Z (%) | 45 |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | - |
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. |
