X12CNDV12 Martensitic Stainless steel
EN X12CrNiMoV12-3, A Martensitic Stainless Steel also known as XM-32, DIN 1.4938, S64152,,, Equivalent standards are similar to one or more standards provided by the supplier.
| Product parameters | |
| Material Category:: | Martensitic Stainless Steel |
| Material Technical Standards:: | DIN EN 10302 / 10269, DIN 17742, EN 10095 |
| Terms of Price:: | Ex-works, CIF, CFR |
| Stocklist & Inventory Available:: | Diameter 55 ~ 220mm |
| Min. order quantity Per Batch:: | 500 KG |
| Certification:: | Commercial Invoice, Packing list, CO, Bill of lading, Origin of Certificate, Form E |
| Product Shapes:: | Round bar, Flat bar, Forgings. |
| Production Lead Time:: | Within 25 days after 40% deposit prepayable |
| Unified Social Credit Code:: | 91510871777942750J |
| Company ISO Register No:: | UQ211218R0 |
Description
Introduction:
X12CNDV12 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
X12CNDV12 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Applications:
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X12CrNiMoV12-3 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X12CrNiMoV12-3 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
All Grades Equivalents
| DIN | W-Nr | Other |
|---|---|---|
| X12CNDV12 / X12CrNiMoV12-3 | W-Nr 1.4938 | 1.4939 |
Chemical Composition (Mass weight %)
| C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|
| 0.08 ～ 0.15 | ≤ 0.50 | 0.40 ～ 0.90 | ≤ 0.025 | ≤ 0.015 | 11.0 ～ 12.5 | 2.00 ～ 3.00 | 1.50 ～ 2.00 | V 0.25 ～ 0.40 V 0.010 ～ 0.040 |
Mechanical Properties under room temp.
| Condition of heat treatment | Tensile Rm(MPa) |
Yield Rp0.2(MPa) |
Elongation A(%) |
Reduction in cross section on fracture Z (%) |
Impact AKV/AKU(J) |
Brinell Hardness(HBW) |
|---|---|---|---|---|---|---|
| Annealing | - | - | - | - | - | - |
| Q/T | 950 ～ 1150 | ≥ 800 | ≥ 13.0 | - | ≥ 55 | - |
Shapes and dimensions:
Round bar (Diameter): 5.5 mm to 700 mm
Wire rod (Diameter): 0.10 ~ 16mm
Square bar / Flat bar: 5mm to 550mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forged ring: OD200 ~ 1500mm X ID150 ~ 1250mm X H20 ~ 1250mm
Heavy/middle plate via hot rolled: T50 - 200mm X W80- 1200mm X L1000-3000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
