ASTM A1021 Grade F
Specifications ASTM A1021 Grade F Datasheet, Stocklist ASTM A1021 Grade F suppliers, ASTM A1021 Grade F Inventory Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic tes
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | ASTM A1021 Grade F |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A1021 (2015) |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - ASTM A1021 Grade F
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.15 ~ 0.20
Si (％): 0.20 ~ 0.60
Mn (％): 0.50 ~ 0.80
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 10.0 ~ 11.5
Ni (％): 0.30 ~ 0.60
Mo (％): 0.80 ~ 1.10
Nb (%): 0.35 ~ 0.55
V (%): 0.15 ~ 0.25
N (%): 0.04 ~ 0.08
W (％): ≤ 0.25
Al (％): ≤ 0.050
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T + SRA )
Condition: Solution annealed 1095 ~ 1120 ℃, air / oil cooled.
Tempered 640℃ min. air cooled.
SRA 610 ℃, air cooled.
Tensile strength, σb/MPa: 960
Yield strength, σ0.2/MPa: 690
Elongation, δ(％): 15.0
Reduction of area, ф ≥ (％): 45.0
Impact strength, Akv ≥/J: 11 Min.
Hardness via heat treatment /HBW: 321 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts.
Pressure vessel parts.
Shaft, forgings and parts for Turnbine.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 300 X 12 ~ 600 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
TECHNICAL SPECIFICATIONS - ASTM A1021 (2015)
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 40mm / 45mm / 55mm / 60mm / 80mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): 0.15 ~ 0.20
Si (％): 0.20 ~ 0.60
Mn (％): 0.50 ~ 0.80
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 10.0 ~ 11.5
Ni (％): 0.30 ~ 0.60
Mo (％): 0.80 ~ 1.10
Nb (%): 0.35 ~ 0.55
V (%): 0.15 ~ 0.25
N (%): 0.04 ~ 0.08
W (％): ≤ 0.25
Al (％): ≤ 0.050
MECHANICAL PROPERTIES UNDER HEAT TREATMENT ( Q + T + SRA )
Condition: Solution annealed 1095 ~ 1120 ℃, air / oil cooled.
Tempered 640℃ min. air cooled.
SRA 610 ℃, air cooled.
Tensile strength, σb/MPa: 960
Yield strength, σ0.2/MPa: 690
Elongation, δ(％): 15.0
Reduction of area, ф ≥ (％): 45.0
Impact strength, Akv ≥/J: 11 Min.
Hardness via heat treatment /HBW: 321 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts.
Pressure vessel parts.
Shaft, forgings and parts for Turnbine.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 300 X 12 ~ 600 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
