Jethete M152 ASTM A565 S64152 Martensitic Stainless Bars
The alloy Jethete M152 is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
| Product parameters | |
| Place of Origin: | P.R. China |
| Stocklist & Inventory Available:: | Diameter 105 / 150mm |
| Melting Process Route:: | EAF + VD + LF / BEF + ESR |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Production Lead Time:: | Within 35 days after 30% deposit prepayable |
Description
DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.08 ~ 0.13, Si (％): ≤ 0.35, Mn (％): 0.50 ~ 0.90, P (％)≤: 0.025, S (％)≤: 0.015
Cr (％): 11.0 ~ 12.5, Ni (％): 2.00 ~ 3.00, Mo (％): 1.50 ~ 2.00, Nb/Ti (%): -, V (％): 0.25 ~ 0.40
N (%): 0.02 ~ 0.04, Fe (%): balance.
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Heat treatment
Tensile strength, σb≥/MPa: 930~1130
Yield strength, σ0.2≥/MPa: 760
Elongation, δ5 (%)≥: 14.0
Hardness ≤HBW: 288 ~ 331
FORMS & DIMENSIONS AVAILABLE
Round bar / Wire rod (Diameter1): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to E-mail (sales@cnlhss.com) our resident team of qualified staff.
