STS301L
Specifications STS301L Datasheet, Inventory STS301L Chemical, Suppliers STS301L Stcoklist Properties Technical specifications - KS D3705 - 2001 / 2006. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 1
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | STS301L |
| Material Technical Standards:: | KS |
| Specification Code:: | KS D3705 - 2001 / 2006 |
| Place of Origin: | Korea |
Description
TECHNICAL DATASHEET - Grade STS301L
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Hot / cold rolled stainless steel Plate, Strip
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 16.0 ~ 18.0
Ni (％): 6.00 ~ 8.00
Mo (％): -
N (%): ≤ 0.20
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1010 ~ 1050 Deg. C .
Tensile strength, σb/ ≥ MPa: 550
Yield strength, σ0.2/ ≥ MPa: 215
Elongation, δ (％) ≥: 45.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 187
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 400mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1200mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Hot / cold rolled stainless steel Plate, Strip
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 16.0 ~ 18.0
Ni (％): 6.00 ~ 8.00
Mo (％): -
N (%): ≤ 0.20
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1010 ~ 1050 Deg. C .
Tensile strength, σb/ ≥ MPa: 550
Yield strength, σ0.2/ ≥ MPa: 215
Elongation, δ (％) ≥: 45.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 187
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 400mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1200mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
