AISI 615 Steel tape, AISI S41800 Round bar
| Product parameters | |
| Material Category:: | Martensitic Stainless Steel Series |
| Material Technical Standards:: | ASTM A276 / A565 / AMS 5508 |
| Terms of Price:: | Ex works, CIF, and CFR |
| Stocklist & Inventory Available:: | Round bar Diam. 20 ~ 110mm / Tape 0.4 ~ 3.0 X 10 ~ 200 X Lmm in Coil |
| Melting Process Route:: | Electroslag remelting |
| Min. order quantity Per Batch:: | 700 kgs |
| Certification:: | Commercial Invoice, Packing list, CO, Bill of lading, Origin of Certificate, Form E |
| Standard Export Packing Way:: | Wooden box, wooden Pallet / tray with free from fumigation. |
| Company ISO Register No:: | UQ211218R0 |
Description
| C (％) | 0.15 ～ 0.20 |
| Si(％) | ≤ 0.50 |
| Mn(％) | ≤ 0.50 |
| P(％) | ≤ 0.040 |
| S (％) | ≤ 0.030 |
| Cr (％) | 12.0 ～ 14.0 |
| Ni (％) | 1.80 ～ 2.20 |
| Mo(％) | ≤ 0.50 |
| Other (％) | W 2.50 ～ 3.50 |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 965 |
| Yield Rp0.2 (MPa) | 760 |
| Elongation A (%) | 15 |
| Reduction in cross section on fracture Z (%) | 45 |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | - |
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
| Forms and Shapes: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
