AMS 5512
Specifications AMS 5512 datasheet, AMS 5512 Chemical, AMS 5512 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these mater
| Product parameters | |
| Material Category:: | Superalloy |
| Steel Grade: | AMS 5512 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5512L |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - AMS 5512
MATERIAL CATEGORY - Austenitic stainless series
TECHNICAL SPECIFICATION - AMS 5512L
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.020
Cr (％): 17.0 ~ 19.0
Ni (％): 9.00 ~ 12.0
Nb (%): 10 X C ~ 1.10
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 483 ~ 793
Yield strength, σ0.2/MPa: 172
Elongation, δ(％): 20.0
Reduction of area, ф(％): -
Hardness (HBW): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - Austenitic stainless series
TECHNICAL SPECIFICATION - AMS 5512L
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.020
Cr (％): 17.0 ~ 19.0
Ni (％): 9.00 ~ 12.0
Nb (%): 10 X C ~ 1.10
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 483 ~ 793
Yield strength, σ0.2/MPa: 172
Elongation, δ(％): 20.0
Reduction of area, ф(％): -
Hardness (HBW): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
