AMS 5540
Aerospace AMS 5540 datasheet, AMS 5540 Chemical, AMS 5540 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5540 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5540N |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARD - AMS 5540
MATERIAL CATEGORY - high alloy stainless Steel Series
TECHNICAL SPECIFICATION - AMS 5540N
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.15
Mn (％): ≤ 1.00
Si (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 Min
Ti (%): ≤ 0.50
Nb (%): ≤ 0.50
Co (%): ≤ 1.00
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: plate, sheet, strip
Tensile strength, σb/MPa: 550
Yield strength, σ0.2/MPa: 240
Elongation, δ(％): 30.0
Reduction of area, ф(％): -
Hardness (HB): 229 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), BEF (AOD) & VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 420mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - high alloy stainless Steel Series
TECHNICAL SPECIFICATION - AMS 5540N
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.15
Mn (％): ≤ 1.00
Si (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 Min
Ti (%): ≤ 0.50
Nb (%): ≤ 0.50
Co (%): ≤ 1.00
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: plate, sheet, strip
Tensile strength, σb/MPa: 550
Yield strength, σ0.2/MPa: 240
Elongation, δ(％): 30.0
Reduction of area, ф(％): -
Hardness (HB): 229 max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), BEF (AOD) & VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 420mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
