AMS 5590
Inventory AMS 5590 Specifications, Suppliers AMS 5590 Datasheet, AMS 5590 Stocklist Steel -melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of thes
| Product parameters | |
| Material Category:: | Superalloy |
| Steel Grade: | AMS 5590 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5590 |
| Place of Origin: | USA |
Description
MATERIAL SPECIFICATIONS DATASHEET - Grade AMS 5590
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5590
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Cu (%): ≤ 0.30
Ni (%): 50.0 ~ 55.0
Ta (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing 1066 Deg.C treated
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 586
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5590
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
C (％): ≤ 0.08
Si (％): ≤ 0.35
Mn (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 17.0 ~ 21.0
Co (%): ≤ 1.00
Mo (％): 2.80 ~ 3.30
Nb/Ta (％): 4.75 ~ 5.50
Ti (%): 0.65 ~ 1.15
Al (%): 0.20 ~ 0.80
B (%): ≤ 0.006
Fe (%): Remainder
Cu (%): ≤ 0.30
Ni (%): 50.0 ~ 55.0
Ta (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing 1066 Deg.C treated
Tensile strength, σb/MPa: 1000
Yield strength, σ0.2/MPa: 586
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
