AMS 5743J
Aerospace AMS 5743J Specifications, Datasheet AMS 5743J Chemical, AMS 5743J Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of th
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5743J |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5743J |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARD - AMS 5743J
MATERIAL CATEGORY - High Alloy Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5743J
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.10 ~ 0.15
Mn (％): 0.50 ~ 1.25
Si (％): ≤ 0.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 15.0 ~ 16.0
Mo (%): 2.50 ~ 3.25
Ni (％): 4.00 ~ 5.00
N (%): 0.07 ~ 0.13
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: plate, sheet, strip
Tensile strength, σb/MPa: 1138
Yield strength, σ0.2/MPa: 965
Elongation, δ(％): 12.0
Reduction of area, ф(％): 25.0
Hardness (HB): HRC37 ` 43.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 350mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - High Alloy Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5743J
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.10 ~ 0.15
Mn (％): 0.50 ~ 1.25
Si (％): ≤ 0.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 15.0 ~ 16.0
Mo (%): 2.50 ~ 3.25
Ni (％): 4.00 ~ 5.00
N (%): 0.07 ~ 0.13
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Form: plate, sheet, strip
Tensile strength, σb/MPa: 1138
Yield strength, σ0.2/MPa: 965
Elongation, δ(％): 12.0
Reduction of area, ф(％): 25.0
Hardness (HB): HRC37 ` 43.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 350mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
