AMS 5764
Aerospace AMS 5764 Specifications, Datasheet AMS 5764 Chemical, AMS 5764 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5764 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5561D |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - Grade AMS 5764
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Austenitic Stainless Steel bar
Technical standards - SAE AMS 5764D
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.060
Si (％): ≤ 1.00
Mn (％): 4.00 ~ 6.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 20.5 ~ 23.5
Ni (％): 11.5 ~ 13.5
Mo (％): 1.50 ~ 3.00
Nb (％): 0.10～0.30
N (%): 0.20 ~ 0.40
V (%): 0.10 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/MPa: 690 min.
Yield strength, σ0.2/MPa: 380 min.
Elongation, δ (％): 35.0 min.
Reduction area, ф (％): 55 min.
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: None
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 400mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers.- Email: sales@cnlhss.com
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Austenitic Stainless Steel bar
Technical standards - SAE AMS 5764D
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.060
Si (％): ≤ 1.00
Mn (％): 4.00 ~ 6.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 20.5 ~ 23.5
Ni (％): 11.5 ~ 13.5
Mo (％): 1.50 ~ 3.00
Nb (％): 0.10～0.30
N (%): 0.20 ~ 0.40
V (%): 0.10 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/MPa: 690 min.
Yield strength, σ0.2/MPa: 380 min.
Elongation, δ (％): 35.0 min.
Reduction area, ф (％): 55 min.
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: None
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 400mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers.- Email: sales@cnlhss.com
