AMS 5810
Description AMS 5810 data sheet, AMS 5810 Specifications, Chemical AMS 5810 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materia
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5810 |
| Material Technical Standards:: | SAE |
| Specification Code:: | SAE AMS 5810 |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - AMS 5810
MATERIAL CATEGORY - Corrosion and heat resistant steel
TECHNICAL SPECIFICATION - SAE AMS 5810
MELTING - Consumable electrode remelted steel
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): ≤ 0.30
Mn (％): ≤ 0.35
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Co (%): ≤ 1.00
Ti (%): 1.90 ~ 2.35
Nb (%): -
Al (%): ≤ 0.35
V (%): 0.10 ~ 0.50
B (%): 0.003 ~ 0.010
MECHANICAL PROPERTY AND HEAT TREATMENT PRACTICE
Forms: Round bar, flat bar, strip, sheet, ring
Condition: solution 900 +/-14 Deg. hold 2h min. and liquid quenching
hardening 720 +/-14 Deg, hold 16h, air cool followed by 650 +/-14 Deg, air cool
Tensile strength,σb/≥ MPa: 895
Yield strength, σ0.2/≥ MPa: 725
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 18.0
Hardness | HBW: 248 ~ 341
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF / VIM + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Strip: THK 0.3 ~ 3.0 X Width 10 ~ 300mm
Sheet: THK 0.3 ~ 10 X Width 10 ~ 1000mm
Round bar (diameter): 5.5 ~ 400mm
Square bar: 5.5 ~ 300 X 5.5 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - Corrosion and heat resistant steel
TECHNICAL SPECIFICATION - SAE AMS 5810
MELTING - Consumable electrode remelted steel
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): ≤ 0.30
Mn (％): ≤ 0.35
P (％) ≤: 0.020
S (％) ≤: 0.010
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Co (%): ≤ 1.00
Ti (%): 1.90 ~ 2.35
Nb (%): -
Al (%): ≤ 0.35
V (%): 0.10 ~ 0.50
B (%): 0.003 ~ 0.010
MECHANICAL PROPERTY AND HEAT TREATMENT PRACTICE
Forms: Round bar, flat bar, strip, sheet, ring
Condition: solution 900 +/-14 Deg. hold 2h min. and liquid quenching
hardening 720 +/-14 Deg, hold 16h, air cool followed by 650 +/-14 Deg, air cool
Tensile strength,σb/≥ MPa: 895
Yield strength, σ0.2/≥ MPa: 725
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 18.0
Hardness | HBW: 248 ~ 341
MELTING PROCESS & APPLICATION
This alloy is generally smelt in BEF / VIM + Electroslag remelting (ESR).
For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Strip: THK 0.3 ~ 3.0 X Width 10 ~ 300mm
Sheet: THK 0.3 ~ 10 X Width 10 ~ 1000mm
Round bar (diameter): 5.5 ~ 400mm
Square bar: 5.5 ~ 300 X 5.5 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
