ASTM A182 Gr.F310H
ASTM A182 Gr.F310H Specifications, Ex-stock ASTM A182 Gr.F310H Datasheet,.F310H Chemical Flat Bar Forging stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | ASTM A182 Gr.F310H |
| Material Technical Standards:: | ASTM |
| Specification Code:: | ASTM A182 - 2018 |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: 20Cr - 25Ni Austenitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.04 ~ 0.10
Mn (％): ≤ 2.00
Si (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.020
Cr (%): 19.0 ~ 22.0
Mo (%): -
Ni (%): 24.0 ~ 26.0
Nb (%): -
Ti (%): -
N (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: Furnace cooling
Tempering temperature: 1040 Deg.C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@cnlhss.com) our resident team of qualified production engineers.
MATERIAL TYPE: 20Cr - 25Ni Austenitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.04 ~ 0.10
Mn (％): ≤ 2.00
Si (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.020
Cr (%): 19.0 ~ 22.0
Mo (%): -
Ni (%): 24.0 ~ 26.0
Nb (%): -
Ti (%): -
N (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: Furnace cooling
Tempering temperature: 1040 Deg.C
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@cnlhss.com) our resident team of qualified production engineers.
