NCF800H
Specifications NCF800H Datasheet, Inventory NCF800H Chemical, Suppliers NCF800H Properties Technical specifications - KS D3531 - 2003. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic te
| Product parameters | |
| Material Category:: | Superalloy |
| Steel Grade: | NCF800H |
| Material Technical Standards:: | KS |
| Specification Code:: | KS D3531 - 1992/2003 |
| Place of Origin: | Korea |
Description
TECHNICAL DATASHEET - Grade NCF800H
Technical Specifications - KS D3531 - 1992/2003
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Heat resistant stainless steel & Superalloy
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.05
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 19.0 ~ 23.0
Ni (％): 30.0 ~ 35.0
Cu (％): ≤ 0.75
Al (%): 0.15 ~ 0.60
Ti (%): 0.15 ~ 0.60
Fe (%): Remainder
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1100 ~ 1170 Deg. C min. rapid colling
Tensile strength, σb/ ≥ MPa: 450
Yield strength, σ0.2/ ≥ MPa: 175
Elongation, δ (％) ≥: 30.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 179 Max.
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Wire rod (Diameter): 0.15 ~ 13mm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
Technical Specifications - KS D3531 - 1992/2003
Official Test Certificate - issued by TUV - SGS - BV
Material Category - Heat resistant stainless steel & Superalloy
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.05
Si (％): ≤ 1.00
Mn (％): ≤ 1.50
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 19.0 ~ 23.0
Ni (％): 30.0 ~ 35.0
Cu (％): ≤ 0.75
Al (%): 0.15 ~ 0.60
Ti (%): 0.15 ~ 0.60
Fe (%): Remainder
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1100 ~ 1170 Deg. C min. rapid colling
Tensile strength, σb/ ≥ MPa: 450
Yield strength, σ0.2/ ≥ MPa: 175
Elongation, δ (％) ≥: 30.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 179 Max.
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Wire rod (Diameter): 0.15 ~ 13mm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
