SAE 30321
Specification SAE 30321 datasheet, SAE 30321 Chemical, SAE 30321 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these mat
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | SAE 30321 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5510S |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - SAE 30321
MATERIAL CATEGORY - Austenitic stainless series
TECHNICAL SPECIFICATION - AMS 5510S
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): 0.25 ~ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 17.0 ~ 19.0
Ni (％): 9.00 ~ 12.0
Ti (%): 5 X (C+N) ~ 0.70
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
N (%): ≤ 0.10
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 482 ~ 785
Yield strength, σ0.2/MPa: 172
Elongation, δ(％): 40.0
Reduction of area, ф(％): -
Hardness (HBW): 241 Max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - Austenitic stainless series
TECHNICAL SPECIFICATION - AMS 5510S
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.08
Si (％): 0.25 ~ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 17.0 ~ 19.0
Ni (％): 9.00 ~ 12.0
Ti (%): 5 X (C+N) ~ 0.70
Mo (％): ≤ 0.75
Cu (%): ≤ 0.75
N (%): ≤ 0.10
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 482 ~ 785
Yield strength, σ0.2/MPa: 172
Elongation, δ(％): 40.0
Reduction of area, ф(％): -
Hardness (HBW): 241 Max.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 450mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
