SAE 51420
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | SAE 51420 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5506E |
| Place of Origin: | USA |
Description
TECHNICAL DATA SHEET - SAE 51420
MATERIAL CATEGORY - Martensitic stainless series
TECHNICAL SPECIFICATION - AMS 5506E per SAE 51420
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.30 ~ 0.40
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 12.0 ~ 14.0
Ni (％): ≤ 0.50
Mo (％): ≤ 0.50
Al (%): ≤ 0.15
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 689 max.
Yield strength, σ0.2/MPa: -
Elongation, δ(％): 12.0
Reduction of area, ф(％): -
Hardness (HBW): 217
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 420mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - Martensitic stainless series
TECHNICAL SPECIFICATION - AMS 5506E per SAE 51420
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): 0.30 ~ 0.40
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 12.0 ~ 14.0
Ni (％): ≤ 0.50
Mo (％): ≤ 0.50
Al (%): ≤ 0.15
Cu (%): ≤ 0.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, sheet, strip
Tensile strength, σb/MPa: 689 max.
Yield strength, σ0.2/MPa: -
Elongation, δ(％): 12.0
Reduction of area, ф(％): -
Hardness (HBW): 217
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Electric Arc Furnace (EAF), EAF+LF+VD, BEF + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 420mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 610mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
