UNS S30200 Stainless Steel Round bar
Description UNS S30200 Stock list, Flat bars SAE 30302 Ex-stock, Suppliers Inventory Wire rod from Steel melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening,
| Product parameters | |
| Stocklist & Inventory Available:: | Diameter 20 ~ 130mm |
| Min. order quantity Per Batch:: | 1300 KG |
| Product Shapes:: | Round bars, flat bars, forgings, ring |
| Heat Treatment Practice:: | Solution annealed 1050 ℃, water or air cooled |
| Standard Export Packing Way:: | Wooden box, pallet / tray free from fumigation |
| Company ISO Register No:: | UQ211218R0 |
Description
Technical Data Sheet
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Typical Applications
Chemical equipment & parts.
Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe, Electronics, Turbine motor blade.
Bolt and nut, Valve body, Pressure vessel.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Shapes And Dimensions
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM
| C (％) | ≤ 0.15 |
| Si(％) | ≤ 1.00 |
| Mn(％) | ≤ 2.00 |
| P(％) | ≤ 0.045 |
| S (％) | ≤ 0.030 |
| Cr (％) | 17.0 ～ 19.0 |
| Ni (％) | 8.00 ～ 10.00 |
| Mo(％) | - |
| Other (％) | - |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 515 |
| Yield Rp0.2 (MPa) | 205 |
| Elongation A (%) | 40 |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 201max |
