X22CrMoV12-1 Martensitic Steel
Description Stock list Flat bars X22CrMoV12-1 Ex-stock, Suppliers Inventory 1.4923 Wire rod from Steel melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening,
| Product parameters | |
| Material Category:: | Martensitic Stainless Steel |
| Product Shapes:: | Round bars, flat bars, forgings, ring |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| ISO 9001-2015 Certified by:: | UKAS |
| Company ISO Register No:: | UQ211218R0 |
Description
Introduction:
X22CrMoV12-1 usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Applications:
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X22CrMoV12-1 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.X22CrMoV12-1 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.
| DIN | W-Nr | Other |
|---|---|---|
| X22CrMoV12-1 | W-Nr 1.4923 | 1.4934 |
Chemical Composition (Weight %)
| C | Si | Mn | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|
| 0.18 ～ 0.24 | 0.18 ～ 0.24 | 0.40 ～ 0.90 | ≤ 0.025 | ≤ 0.015 | 11.0 ～ 12.5 | 0.30 ～ 0.80 | 0.80 ～ 1.20 | V 0.25 ～ 0.35 |
Mechanical Properties At Room Temperature.
| Condition of heat treatment | Tensile Rm(MPa) |
Yield Rp0.2(MPa) |
Elongation A(%) |
Reduction in cross section on fracture Z (%) |
Impact AKV/AKU(J) |
Brinell Hardness(HBW) |
|---|---|---|---|---|---|---|
| Annealing | - | - | - | - | - | - |
| Q/T | 800 ～ 950 | ≥ 600 | ≥ 14.0 | - | ≥ 34 | - |
Round bar (Diameter): 5.0 mm to 500 mm
Wire rod (Diameter): 1.0 ~ 16mm
Square bar / Flat bar: 10 to 550mm
Steel strip via cold rolled: T0.5 - 3mm X W10 - 200 X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
