UNS S32520 Forgings
| Product parameters | |
| Material Category:: | Duplex Series |
| Min. order quantity Per Batch:: | 1300 KG |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Company ISO Register No:: | UQ211218R0 |
Description
| C (％) | ≤ 0.03 |
| Si(％) | ≤ 0.80 |
| Mn(％) | ≤ 1.50 |
| P(％) | ≤ 0.035 |
| S (％) | ≤ 0.020 |
| Cr (％) | 24.0 ～ 26.0 |
| Ni (％) | 5.50 ~ 8.00 |
| Mo(％) | 3.00 ~ 5.00 |
| Other (％) | N 0.20 ～ 0.35 Cu 0.50 ~ 2.00 |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 770 |
| Yield Rp0.2 (MPa) | 550 |
| Elongation A (%) | 25 |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 310 |
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
| Forms and Shapes: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
