X15CrNi17-03
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | X15CrNi17-03 |
| Material Technical Standards:: | DIN |
| Specification Code:: | DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312 |
| Place of Origin: | Germany |
Description
TECHNICAL SPECIFICATION - Grade X15CrNi17-03
TECHNICAL SPECIFICATION: DIN EN 10088-1, 10302
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL TYPE: Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.12 ~ 0.20
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％) ≤: 0.035
S (％) ≤: 0.025
Cr (%): 15.0 ~ 18.0
Mo (%): -
Ni (%): 2.00 ~ 3.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 880 ~ 1080
Yield strength, σ0.2/≥ MPa: 690
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 262 ~ 326
Quenching, 1010,+/-10 Deg, tempering 605, +/-5 Deg.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forged plate: T90 ~ 400 X W50 ~ 1200 X Length
Steel strip: T0.20 ~ 3mm X W10 ~ 1200mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com.
TECHNICAL SPECIFICATION: DIN EN 10088-1, 10302
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS
MATERIAL TYPE: Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.12 ~ 0.20
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％) ≤: 0.035
S (％) ≤: 0.025
Cr (%): 15.0 ~ 18.0
Mo (%): -
Ni (%): 2.00 ~ 3.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 880 ~ 1080
Yield strength, σ0.2/≥ MPa: 690
Elongation, δ ≥(％): 12.0
Reduction of area, ф ≥ (％): -
Impact, AK (J/cm2): -
Annealed hardness | HB: 262 ~ 326
Quenching, 1010,+/-10 Deg, tempering 605, +/-5 Deg.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Forged plate: T90 ~ 400 X W50 ~ 1200 X Length
Steel strip: T0.20 ~ 3mm X W10 ~ 1200mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com.
