X3CrNi13-4
Specifications ASTM A890 Gr.3A datasheet, ASTM A890 Gr.3A Chemical, A890 Gr.3A properties steelmaking, hot forging, hot rolling, ASTM A890 heat treatment, cold working. We also possess advanced precision machining equipments for further processing
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | X3CrNi13-4 |
| Material Technical Standards:: | DIN |
| Specification Code:: | DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312 |
| Place of Origin: | Germany |
Description
MATERIAL DATA SHEET - DIN X3CrNi13-4
MATERIAL CATEGORY - Common alloy steel - Martensitic corrosion resisting steels
MATERIAL SPECIFICATIONS - DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％)≤: 0.70
Mn (％)≤: 1.50
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0～14.0
Ni (％): 3.50～4.50
Mo (％): 0.30～0.70
Other(％): N ≥ 0.020
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition: heat treatment
Thickness/mm: 160~25
Tensile strength, σb/MPa: 650～830
Yield strengt, σ0.2≥/MPa: 520
Elongation, δ5≥(％): 15/12
Reduction of area, ψ≥(％): —
Impact strength, Akv≥/J: 70/50
/40Hardness HBS30: -
Condition: heat treatment
Thickness/mm: 160~25
σb/MPa: 780～980
σ0.2≥/MPa: 620
δ5≥(％): 15/12
ψ≥(％): —
Akv≥/J: 70/50
Hardness HBS30: -
Thickness/mm: 160~25
σb/MPa: 900～1100
σ0.2≥/MPa: 800
δ5≥(％): 12/10
ψ≥(％): —
Akv≥/J: 50/40
Hardness HBS30: -
AVAILABILITY
Round bar / flat bar / steel strip / square bar / forge piece
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Medical equipment
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
PRODUCT PROFILE & FORMS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1200 mm, with wall thickness ranging from 15 to 350 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@cnlhss.com.
MATERIAL CATEGORY - Common alloy steel - Martensitic corrosion resisting steels
MATERIAL SPECIFICATIONS - DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
Si (％)≤: 0.70
Mn (％)≤: 1.50
P (％)≤: 0.040
S (％)≤: 0.015
Cr (％): 12.0～14.0
Ni (％): 3.50～4.50
Mo (％): 0.30～0.70
Other(％): N ≥ 0.020
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Condition: heat treatment
Thickness/mm: 160~25
Tensile strength, σb/MPa: 650～830
Yield strengt, σ0.2≥/MPa: 520
Elongation, δ5≥(％): 15/12
Reduction of area, ψ≥(％): —
Impact strength, Akv≥/J: 70/50
/40Hardness HBS30: -
Condition: heat treatment
Thickness/mm: 160~25
σb/MPa: 780～980
σ0.2≥/MPa: 620
δ5≥(％): 15/12
ψ≥(％): —
Akv≥/J: 70/50
Hardness HBS30: -
Thickness/mm: 160~25
σb/MPa: 900～1100
σ0.2≥/MPa: 800
δ5≥(％): 12/10
ψ≥(％): —
Akv≥/J: 50/40
Hardness HBS30: -
AVAILABILITY
Round bar / flat bar / steel strip / square bar / forge piece
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
TYPICAL APPLICATIONS
Medical equipment
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
PRODUCT PROFILE & FORMS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1200 mm, with wall thickness ranging from 15 to 350 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. Email: sales@cnlhss.com.
