P6 / T51606 Bright Round bar
Product parameters | |
Material Category:: | Hot working tool steel |
Material Technical Standards:: | ASTM A681 - 2004 |
Min. order quantity Per Batch:: | 500 kgs |
Product Shapes:: | Round bars, flat bars, forgings, ring |
Production Lead Time:: | Within 45 days after 40% deposit prepayable |
Company ISO Register No:: | UQ211218R0 |
Description
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. Bars are usually supplied black/bright in the annealed condition.
C (%) | 0.05 ~ 0.15 |
Si(%) | 0.10 ~ 0.40 |
Mn(%) | 0.35 ~ 0.70 |
P(%) | ≤ 0.030 |
S (%) | ≤ 0.030 |
Cr (%) | 1.25 ~ 1.75 |
Ni (%) | 3.25 ~ 3.75 |
Mo(%) | - |
Other (%) | - |
Condition of heat treatment | annealing |
Tensile Rm (MPa) | - |
Yield Rp0.2 (MPa) | - |
Elongation A (%) | - |
Reduction in cross section on fracture Z (%) | - |
Impact AKV/AKU (J) | - |
Brinell Hardness (HBW) | 207 |
Forms and Dimensions: Round bar (Diameter): 5.50 ~ 550mm Square bar / Flat bar: 3 ~ 600mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |