AISI 611 High Carbon Molybdenum Tool Steel
| Product parameters | |
| Material Category:: | Tungsten Chromium Molybdenum type Steel |
| Place of Origin: | P. R. China |
| Terms of Price:: | Ex works, CIF, and CFR |
| Min. order quantity Per Batch:: | 1300 KG |
| Product Shapes:: | Round bar, Flat bar, Plate |
| Production Lead Time:: | Within 55 days after 30% downpayment. |
| Company ISO Register No:: | UQ211218R0 |
Description
| C (％) | 0.78 ～ 0.88 |
| Si(％) | 0.20 ～ 0.50 |
| Mn(％) | 0.15 ～ 0.40 |
| P(％) | ≤ 0.030 |
| S (％) | ≤ 0.030 |
| Cr (％) | 3.50 ～ 4.00 |
| Ni (％) | - |
| Mo(％) | 4.50 ～ 5.50 |
| Other (％) | W 5.50 ～ 6.75 V 0.30 ～ 0.50 |
| Condition of heat treatment | annealing |
| Tensile Rm (MPa) | - |
| Yield Rp0.2 (MPa) | - |
| Elongation A (%) | - |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 212 ～ 241 |
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
Product Shapes: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
